8 %s Setup has enough information to start copying files.
9 If you want to review or change any settings, click Back. If you are
10 satisfied with the settings, click Next to begin copying files.
11
12 Selected Products
13
14 Type of Installation
15 List of Components
16 Program Folder
17 Destination Directory
18 To complete the installation, Windows needs to be restarted.
19 Please close all applications and DOS windows.
20 Restart Windows
21 Key %s was not found in section %s of %s
22 File %s was not found in %s
23 You have not selected an installation option.\n\nDo you wish to exit %s?
24 Internal error: An unknown choice was made from the Setup Type dialog.
25 Unable to load external DLL %s.\n\nSetup cannot continue.
26 The serial number %s is not a valid %s serial number.\n\nPlease re-enter your serial number.
27 An error occured during installation. Please contact Adobe Systems Technical Support.
28 You must be running %s %d.%d to install this application.
29 This program requires Windows 3.1 or higher.
30 This program requires VGA or better resolution.
31 Unable to create a directory under %s
32 Please check write access to this directory.
33 Please check target location %s and try installing again.
34 Incorrect disk inserted.\nPlease insert Disk %s
35 The destination directory you have specified does not allow write access.\n\nPlease select another directory.
36 Setup has determined that you do not have enough space available\non the destination drive. Please select another drive.
37 Unable to create directory %s\nPlease change your access rights or select another location before continuing.
38 This version of %s requires %s,\nand you are running %s.\n\nSetup cannot continue.
39 Unable to read key %s in section %s of %s
40 Unable to write value %s for key %s\nin section %s of %s
41 Encountered unknown compression type %s\nduring installation of %s
42 The destination directory could not be determined for %s
43 Unable to locate %s directory for installation of %s
44 Unable to install %s.\n\nSetup cannot continue.
45 Unable to launch %s.\n\nThe returned error was %d.
46 Unable to change directory to %s
47 The space available (%ld bytes) on the disk is not enough for installation.\n
48 Please free some disk space or change the destination disk drive.
49 \n\nError Number: %d
50 Internal error in installation script.
51 Error displaying error message.
52 An error occurred while decompressing files. Please try again.
53 An error occurred while copying files.
54 Internal error. Unable to create custom dialog.\nExiting installation program.
55 Due to a system error, Setup is unable to display a dialog.
56 An unknown error has occurred while performing file set.
57 Unable to copy file to destination location %s
58 An error occurred previously in specified file set.\nPossibly out of memory or resources.\nPlease close all other applications and try installing again.
59 Unable to copy files due to insufficient space on destination drive %s.
60 Target file %s requested by CompressGet function\ndoes not exist in compressed library.
61 Disk inserted in drive was not disk requested.
62 An error occurred during process of copying or decompressing files.
63 Specified file %s is not listed in packaging list.
64 Not enough sub-component STRINGs have been defined\nfor the number of sub-components in this build.\nYou will need to alter the template script to handle this.
65 Not enough parameters for function %s used with key %s of Product %s
66 Unknown function %s used by %s definition in Product %s
67 Incomplete functionality for [%s] in key %s of Product %s
68 Creating Program Folder and Icons...
69 Click Finish to complete Setup.
70 Setup is complete. You may view the Readme file at this time.
71 Installation complete.
72 Decompressing %s files into %s
73 Setup is complete. You may register your copy of %s \nelectronically from your computer at this time.
74 Setup is complete. You may register your copy of %s electronically and view the Readme file at this time.
75 %s online registration.
76 Display %s Readme file.
77 Setup is Complete!\n\nThank you for choosing %s!
78 Setup is Complete!\n\nThank you for choosing %s and \nplease be sure to send in the registration information.
79 Thank you for choosing %s!
80 Transferring files from Disk %s
81 Please insert Disk %s
82 Windows Operating System
83 Windows 95 or Windows NT
84 Windows 3.1x - 16 bit
85 Windows 95
86 Windows NT
87 Windows 3.1x w/ 32 bit extensions
88 Any Windows operating systems except Windows NT
89 Unknown operating system
90 The available space on destination disk drive (%s) is not enough \nfor creation of some temporary files needed during installation.\n\n
91 This installation requires %ld MBytes of free disk space.
92 Decompressing Online Registration files into %s
93 Decompressing Win32s files into %s
94 Adobe
95
96
97
98
99 EULA_US.TXT
100 Software License Agreement
101 Please read the following License Agreement. Use the scroll bar to view the rest of the agreement.
102
103
104
105
106
107
108 Select the components you want to install, clear the components you do not want to install. Using the default selections will result in a typical installation for each product.
109
110
111
112
113
114
115
116 Please wait while %s is determining the component information.
117 Please wait while %s is determining the installation file set.
118
119
120
121
122
123
124 Creating registry entries for %s
125 Writing user information...
126 Setup is not complete. If you quit now,\n%s will not be installed.\n\nYou may run Setup at a later time to complete the\ninstallation.\n\nDo you wish to resume installing %s?
127 Exit Setup
128
129
130 1 2 3
131 Register
132 Uninstall
133 Mr./Mrs./Miss/Ms
134 First Name
135 Middle Initial
136 Last Name
137 Company
138 ENU
139
140
141 Please fill in the 'Company' name field.
142 Please fill in either the 'First Name' or 'Last Name' field.
143 Please select who the product will be registered to.
144 The information in the '%s' field, has exceeded the field boundary.\nPlease enter up to %d characters.
145 Please fill in the 'Serial Number' field.
146 \Adobe\Illustrator 7.0 Tryout
147 Illustrator 7.0 Tryout
148 Illustrator 7.0 Tryout
149 Adobe Illustrator 7.0 Tryout Setup
150 Adobe Illustrator 7.0 Tryout ReadMe
151 Unable to install Adobe Illustrator 7.0 Tryout. Minimum configuration\n requires a 486 processor or greater.
152 StdAdobe
153 AB
154
155
156 <Unknown file>
157 Unable to open file %s.
158
159 The information in the '%s' field, has exceeded the field boundary.\nPlease enter only one character.
400 Illustrator 7.0 Tryout
401 Illustrator Tryout
402 Adobe Illustrator 7.0 Tryout application
403 This component consists of the Adobe Illustrator 7.0 Tryout application and associated files.
404 Decompressing Adobe Illustrator 7.0 Tryout files into %s
405 Adobe Illustrator 7.0 Tryout
406 Adobe Illustrator 7.0 Tryout ReadMe
407 Plug-ins
408 This installs the Plug-ins folder. The Plug-ins folder is essential for many filters and features of Adobe Illustrator.
409 Decompressing Plug-ins into %s
410 Required Plug-ins
411 Plug-ins that must be present for the product to run.
412 Decompressing Required Plug-ins into %s
413 Extension Plug-ins
414 Plug-ins that add commonly used menu items, palettes, APIs and the ability to run old plug-ins and plug-ins from other products.
415 Decompressing Extension Plug-ins into %s
416 Swatches
417 Swatch palettes for various color systems.
418 Decompressing Swatches into %s
419 Plug-in Tools
420 Plug-ins that add icons to the tool palette.
421 Decompressing Plug-in Tools into %s
422 Illustrator File Format Plug-ins
423 Standard set of plug-ins that allow import/export of various file formats that are primarily path/vector-oriented.
424 Decompressing Illustrator File Format Plug-ins into %s
425 Illustrator Filter Plug-ins
426 Plug-ins that modify path/vector-oriented data.
427 Decompressing Illustrator Filter Plug-ins into %s
428 Photoshop File Format Plug-ins
429 Standard set of plug-ins that allow import/export of various file formats that are primarily image-oriented.
430 Decompressing Photoshop File Format Plug-ins into %s
431 Photoshop Filter Plug-ins
432 Plug-ins that modify image-oriented data.
433 Decompressing Photoshop Filter Plug-ins into %s
434 Photoshop Effects Plug-ins
435 Standard set of plug-ins that perform special effects on image-oriented data.
436 Decompressing Photoshop Effects Plug-ins into %s
437 Additional Plug-ins - Text File Formats
438 Plug-ins that allow import/export of various file formats that are primarily text-oriented, such as word-processing formats.
439 Decompressing Additional Plug-ins - Text File Formats into %s
440 Text Filter Plug-ins
441 Plug-ins that modify text-oriented data.
442 Decompressing Text Filter Plug-ins into %s
443 Help-Support Plug-ins
444 Plug-ins that provide online help or aid in product support.
445 Decompressing Help-Support Plug-ins into %s
446 Optional Plug-ins
447 This installs the Optional Plug-ins folder.
448 Decompressing Optional Plug-ins into %s
449 Fonts
450 Collection of approximately 300 Type1 fonts.
451 Decompressing Fonts into %s
452 Kodak CMS and minimal set of ICC profiles
453 This installs the Kodak Color Management System (CMS) as well as a minimal set of ICC color matching profiles.
454 Decompressing Kodak CMS and minimal set of ICC profiles into %s
455 ICC Profiles
456 Collection of color matching profiles for various monitors and printers to enable color matching via a color management system (CMS).
457 Decompressing ICC Profiles into %s
458 Sample Files
459 This installs the Sample Files folder. This folder contains sample artwork, templates and graph samples.
460 Decompressing Sample Files into %s
461 Sample Fill Patterns
462 Sample Fill Patterns
463 Decompressing Sample Fill Patterns into %s
464 Sample Gradients
465 Sample Gradients
466 Decompressing Sample Gradients into %s
467 Graphs and Graph Design
468 Graph-oriented sample files
469 Decompressing Graphs and Graph Design into %s
470 Sample Hatch Sets
471 Sample Hatch Sets for the Ink Pen plug-in
472 Decompressing Sample Hatch Sets into %s
473 Sample Path Patterns
474 Sample Path Patterns
475 Decompressing Sample Path Patterns into %s
476 Sample Art
477 Sample Art
478 Decompressing Sample Art into %s
479 Sample Templates
480 Sample Templates
481 Decompressing Templates into %s
482 Tutorial Files
483 This installs the Tutorial folder.
484 Decompressing Tutorial files into %s
485 Utility Files
486 This installs the Utilities folder. This folder contains information about PostScript printers and the Riders plug-in.
487 Decompressing Utility files into %s
488 Nothing
489 Additional Illustrator File Format Plug-ins
490 Additional set of plug-ins that allow import/export of various path/vector-oriented file formats such as Corel, AutoCAD, CGM and WMF.
491 Decompressing Additional Illustrator File Format Plug-ins into %s
492 Additional Photoshop File Format Plug-ins
493 Additional set of plug-ins that read/write Amiga IFF, MacPaint and PixelPaint formats.
494 Decompressing Additional Photoshop File Format Plug-ins into %s
495 Additional Photoshop Effects Plug-ins
496 Additional plug-ins that perform special effects on image-oriented data.
497 Decompressing Additional Photoshop Effects Plug-ins into %s
498 Libraries
499 Additional swatch libraries that can be loaded using the Windows->Libraries command. Includes libraries of fill patterns, gradients and path patterns.
500 Decompressing Additional Swatch Libraries into %s
